Sony HDCAM HDW-700A Operation Manual page 39

VTR START button
23
Press this button to start recording. Press it again to stop recording. The
effect is exactly the same as that of the VTR button on the lens.
VTR SAVE / STBY (VTR power saving / standby) switch
24
This switch controls the VTR power mode during pauses in recording
(REC PAUSE).
SAVE: Power saving mode. When you press the VTR START button,
there is a short delay before recording starts, but power consumption
is less than in standby mode, and battery life is extended. When the
switch is set to SAVE, the VTR SAVE indicator in the viewfinder
lights.
STBY: Standby mode. Recording starts as soon as you press the VTR
START button.
EJECT (cassette eject) button
25
Press this button to eject or load a cassette.
26 REW (rewind) button and indicator
Press this button to rewind the tape. The indicator lights during
rewinding.
FWD (fast forward) button and indicator
27
Press this button to fast forward the tape. The indicator lights during fast
forward.
Chapter 2 Locations and Functions of Parts and Controls
2
2-25