Chapter 5 Setting Up The Camcorder; Power Supply; Using A Bp-L60A/L90A Battery Pack - Sony HDCAM HDW-700A Operation Manual

5-1 Power Supply

You need to power on the camcorder to adjust the flange focal length
and make other adjustments, which are described later.
First, prepare the power supply.
The following power supplies can be used with the camcorder.
• A BP-L60A/L90A lithium-ion battery pack
• A BP-90A Ni-Cd battery pack
• AC power using AC-550
You can also make combined use of internal and external batteries by
mounting one of the above batteries as an internal battery and connecting
an external battery that can be a BP-90A contained in a DC-210 Battery
Adaptor and connected to the DC IN of the camcorder.
5

5-1-1 Using a BP-L60A/L90A Battery Pack

When a BP-L60A Battery Pack is used, the camcorder will operate
continuously for about 80 minutes. When a BP-L90A Battery Pack is
used, it will operate continuously for about 120 minutes. Before use,
charge the battery pack with a BC-L100 Battery Charger. It takes about
2.5 hours to charge one BP-L60A and about 3.5 hours to charge one BP-
L90A.
For more information, refer to the BC-L100 manual.
Note on using the battery pack
A warm battery pack may not be able to be fully recharged.

Chapter 5 Setting Up the Camcorder

5-1