Using An External Microphone Attached To The Camcorder - Sony HDCAM HDW-700A Operation Manual

Using an external microphone attached to the
camcorder
You can attach an external microphone to the camcorder by using the
CAC-12 Microphone Holder (not supplied). Additionally, by using the
CRS-3P Cradle Suspension (not supplied), you can reduce the
mechanical vibration noise from the VTR, and can also attach a long
microphone. Note, however, that use of the CRS-3P requires a
microphone holder (A) (Part No. 3-680-581-01), which is not supplied
with the CRS-3P.
The procedure for attaching an external microphone using a CAC-12 and
CRS-3P is shown below.
Refer to the microphone holder or cradle suspension manual for more information.
1
Assemble the CRS-3P Cradle Suspension and microphone holder (A)
(Part No. 3-680-581-01).
Chapter 5 Setting Up the Camcorder
5
(Continued)
5-19