Setting The Gain Selector Values - Sony HDCAM HDW-700A Operation Manual

5
To continue setting other items, repeat steps 3 and 4.
6
To end menu operations, turn the VF DISP switch to ON.
The menu disappears from the viewfinder screen, and the display
indicating the current status of the camcorder appears along the top
and bottom of the viewfinder screen.

4-7-5 Setting the GAIN Selector Values

Before using the camcorder, use the GAIN SW page of the
OPERATION menu to set the gains corresponding to the L, M, and H
positions of the GAIN selector, which switches the gain of the video
amplifier.
Setting the GAIN selector values
Follow the procedure below to select the items.
1
Set the VF DISP switch to MENU.
2
Turn the MIC/MENU knob until the GAIN SW page appears, and
push the MIC/MENU knob.
LOW: Set the gain value corresponding to the L position of the
GAIN selector.
MIDDLE: Set the gain value corresponding to the M position of
the GAIN selector.
HIGH: Set the gain value corresponding to the H position of the
GAIN.
3
Turn the MIC/MENU knob to move the arrow (→) to the item you
want to set, and push the MIC/MENU knob.
The arrow (→) changes to a question mark (?).
Chapter 4 Adjustments and Settings for Recording
4 4
( Continued)
4-45