Entering The Real Time In The Vitc - Sony HDCAM HDW-700A Operation Manual

3
Watching the playback, find the point of the previous recording on
the tape from which you wish to continue recording, and press the
STOP button.
4
Press the RET button on the lens.
This reads the previous recording and synchronizes the internal time
code generator, thus allowing the new time code recorded to follow
on consecutively.

4-4-3 Entering the Real Time in the VITC

Follow the procedure below to enter the real time in the VITC.
Entering the real time in the VITC
Chapter 4 Adjustments and Settings for Recording
4
4-21