Sony HDCAM HDW-700A Operation Manual page 168

6
Mount the microphone into the cradle suspension.
5
7
Connect the microphone cable to the AUDIO IN connector for
channel 1 or 2. Set the corresponding AUDIO IN switch to REAR.
Set the LINE/MIC/+48 V ON switch to +48 V ONor MIC in
accordance with the type of the microphone power supply.
Note
When you connect a microphone to the AUDIO IN connector for
channel 1 and 2, set the appropriate LINE/MIC/+48 V ON switch to
MIC.
5-22 Chapter 5 Setting Up the Camcorder