R key function for VoIP – Hook flash/call diversion
This section replaces/amends the sections "Web configurator – Defining recall key functions for VoIP
(hook flash)" in the user guide for your Gigaset VoIP phone.
Using your phone's Web configurator, you can assign a special feature of your VoIP provider
to the S key. Alternatively, you can use the S key for call diversion (call transfer).
Assigning the signal for a provider feature to the
To be able to use a special feature of your VoIP provider, your phone must send a specific
signal (data packet) to the SIP server. You can assign this "signal" to your phone's R key.
If you press the R key during a VoIP call the signal will be sent to the server.
Precondition:
u
DTMF reminders via SIP info messages is activated, i.e. the
page is activated.
The S key is not used for call transfer, i.e.
u
Refer method.
=
No
If one of these preconditions is not fulfilled, the field in the
¤
Open the following Web page:
Area
Hook Flash (R-key)
¤
In the
Application Type
15 characters), enter the data that you have received from your VoIP provider.
¤
Now select
to save your settings.
Set
The setting for the S key applies to all registered handsets.
is set for call transfer (
Settings
(maximum 31 characters) and
Description of new and updated functions
R key function for VoIP – Hook flash/call diversion
S
key
Use the R key to initiate call transfer with the SIP
£
Page
22).
Hook Flash (R-key)
¢
¢
Telephony
Advanced
Application Signal
SIP Info
option on this web
area is hidden.
Settings.
fields (maximum
21