Description Of New And Updated Functions; Changes To Phone Setup Process - Gigaset C675 IP User Manual

Description of new and updated functions

Changes to phone setup process

This section amends the section "First steps – Making settings for VoIP telephony" in the user guide for
your Gigaset VoIP phone.
The procedures for "Making settings for VoIP telephony" have changed as follows.
1. Auto-configuration:
After you have started the installation assistant and entered the system PIN, the follow-
ing is displayed:
Do you have a
code for auto
configuration?
No
If you have received an auto-configuration code (Activation Code) from your VoIP pro-
vider:
¤
Press the key below
You are prompted to enter the code.
¤
Use the keypad to enter the auto-configuration code (max. 32 characters) and press
.
§OK§
All data necessary for VoIP telephony is loaded directly from the Internet to your phone.
The handset returns to idle status. The configuration is complete.
If your VoIP provider has supplied you with an authentication name/password and,
where applicable, a user name:
¤
Press the key below
The VoIP configuration is then performed as described in the user guide for your tele-
phone.
Yes
on the display screen.
§Yes§
on the display screen.
§No§
Description of new and updated functions
Changes to phone setup process
5