Something Not Working - Zanussi ZTE 280 User Manual

Something not working?

Before contacting your local Service Centre, please make the following checks:
Problem
• The dryer does not work:
• The dryer does not dry properly:
If, after the above checks, there is still a fault, call your local Service Centre.
Please make sure you give the model and serial number of the appliance.
This information can be found on the rating plate (see picture on page 6 ).
Possible cause
• The door(s) has (have) not been closed.
• The plug is not properly inserted in the power socket.
• There is no current at the socket.
• The main fuse or the fuse in the plug has blown.
• The selector dial is not set correctly.
• The water reservoir is full or not properly inserted (the
light is on). The programme starts in any case but
it stops after approx. 4 minutes.
• The Button has not been depressed.
• The option has not been selected.
• The laundry has not been spun properly.
• The filters and/or the condenser are clogged up.
• The water reservoir is full.
• The room temperature is too high.
• The selected time or drying cycle was not suitable for
the laundry.
• The button has been pressed.
• There is too much laundry inside the appliance.
• The dryer is not correctly installed.
19