Zanussi ZTE 280 User Manual page 12

9 Delay Start button
This button allows
you to delay the
starting of the
programme by 20
hours max.
This option must be
selected after
having selected the
programme and
before pressing
to start the
programme.
Every time the
button is pressed,
the time is
increased by 30
minutes, until the
display shows a
delay of "2 hours".
After this, the delay
is displayed hour by
hour.
The minutes or
hours of delay that
have been selected
are displayed for 2
seconds, then the
display shows the
duration of the
previously selected
programme.
The countdown
begins after you
have pressed the
button.
To cancel the delay
time press the
12
button and after
press the button
until the display
indicates 0'.
Then press
the button
again.
When the delay is
cancelled, the
display shows 0'
and after the
duration of the
programme.
During the delayed
start, it is not
possible to change
the programme or
the delay time that
have been selected.
To do this, you must
first switch off the m
machine by setting
the programme
selector dial to O.
Select the new
programme, the
options and the
mdelayed start,
then press the
button.
During the delayed
start, to cancel or
change functions
that have been
selected, simply set
the appliance to
PAUSE. Once you
perform the desired
operation, press
once again the
button.
If you wish to add
more laundry while
the machine is
performing the
countdown, simply
open the door.
This button must be
depressed also
after a power failure
and after having re-
inseted the water
reservior, if it has
been emptied in the
middle of a
programme after
ligting up of light
When you close the
door, press the
button again to
cause the
countdown to be
resumed.
10 Indicator lights
These lights
indicate the
following functions:
light
(Clogged
condenser)
It comes on every
80 cycles to remind
you that the
condenser must be
cleaned.
light
(Clogged filters)
This light illuminates
at the end of the
programme to
remind you that the
filters must be
cleaned.
light
(Full tank)
This light comes on
at the end of the
programme to
remind you that the
water reservoir
must be emptied
out. If this light
illuminates during a
programme this
means that the
water reservoir is
full. The buzzer
sounds, the
programme stops,
the light of the
button flashes.