Display Messages; Inside Light - Smeg Oven Instructions For Use Manual

Instructions for the User

10.4 Display messages

DISPLAY
SOFT SOFT SOFT WATER.
SOFT SOFT
MEDIUM WATER.
med med med med
hard hard HARD WATER.
hard hard
APPLIANCE MUST BE DESCALED.
CAL CAL
CAL CAL
FLASHING – DESCALING STARTS.
0.5L 0.5L FEED 0.5 LITRE DESCALING SOLUTION INTO THE WATER TANK.
0.5L 0.5L
1.0L 1.0L FEED 1 LITRE COLD WATER INTO THE WATER TANK FOR RINSING.
1.0L 1.0L
INDICATION THAT WATER TANK IS MISSING OR WRONGLY INSERTED
THE WATER TANK MUST BE REMOVED, EMPTIED AND REINSERTED.
STEAM REDUCTION AND WATER PUMPING
VAP VAP VAP VAP INDICATION THAT STEAM REDUCTION PROCESS IS ONGOING.
INDICATION THAT COLD WATER IS ENTERING THE BOILER AND HOT
PUMP PUMP PUMP PUMP
WATER IS BEING PUMPED TO THE WATER TANK.
THE WATER TANK MUST BE REMOVED, EMPTIED AND REINSERTED.
FULL FULL FULL FULL
PERFORM WATER LEVEL CALIBRATION ( SEE 8.3.2)
TEMPERATURE IN THE PCB IS TOO HIGH.
CHILD SAFETY LOCK-OUT FUNCTION
DESCALE FUNCTION
WATER LEVEL INDICATION
TEMPERATURE
10.5 Cooling fan system
The appliance is equipped with a cooling system which comes into
operation as soon as a cooking function starts.
Operation of the fans generates a normal air flow which comes out
above the door and may continue for a short time even after the oven
is switched off.

10.6 Inside light

The oven light comes on:
when the oven door is opened in standby status (point "8.2
Operating settings") or;
when the function knob is turned to any function.
If the oven door is left open, the oven light will automatically shut-off after
10 minutes.
DESCRIPTION
DESCALING
WATER TANK
SYSTEM WARNINGS
SYMBOLS
EN
22