Classe Audio CAP-2100 Owner's Manual page 20

20
3 Input Selection
These Up and Down arrow keys will cycle through the active inputs on
your CAP-2100.
If you have inputs you are not using, we suggest deactivating them in order
to provide faster, easier access to the inputs you are actually using. (See the
section The Menu System, the next section in this manual, for information
on how to do this.)
4 System Controls
The CAP-2100 remote control can also control user-defined functions as
well as the volume and mute functions on a Classé system.
• F1/F2/F3/F4 keys are available for controlling aspects of the
CAP-2100 not covered by the other buttons on the remote
control. You are able to choose what the CAP-2100 should do
in response to receiving the infrared signal that a particular Fkey
has been pressed. The list of possible functions is quite extensive,
and is found in the menu system (see the section The Menu
System, the next section in this manual).
Note: The Fkeys on all Classé remote controls issue the same infrared
commands. This saves you from having to be sure you have
picked up the proper remote, since all your Classé remotes
will perform the same function for each Fkey.
• Volume Up, Volume Down, and Mute do what you would
expect them to do.
• The Bal (balance) key takes you directly to the balance screen
in the menu system; once there, you can use the navigation keys
on the remote to select either the left or right buttons on the
LCD touchscreen, depending on which way you wish to move
the balance. Adjust the relative left-right balance of the system
by using the Enter key on the remote to "press" the appropriate
button on the display.