Classe Audio CAP-2100 Owner's Manual page 17

The integrated amplifier is designed to respond to IR commands of 5
VDC, with the tip of the mini-plug defined to be positive relative to the
shank of the plug.
8 Classé CAN Bus Control Ports
These RJ-45 connectors are reserved for future control and
communication applications using Classé Audio's implementation of the
Controller Area Network (CAN) Bus specification.
9 RS-232 Control Port
This DB-9 connector has two purposes:
• downloading new operating software into your integrated
amplifier (should new features ever be added, for example)
• external control of your integrated amplifier by control systems
such as i-Command
For more information, please contact your dealer and ask about home
automation systems.
10 DC Trigger Input and Output
Many audio/video components can supply a DC control voltage to
associated equipment in order to induce desired behavior. Your Classé
integrated amplifier can take advantage of these capabilities in order to be
switched between operate and standby automatically.
The 1/8th-inch mini-jack Trigger In provides for remote-controlled
turn-on (that is, toggling between operate and standby) of the integrated
amplifier.
Two 1/8th-inch mono mini-jacks provide individually controllable DC
trigger outputs which can be used for any of a number of purposes, as
described in The Menu System. For example, your dealer can program
Trigger Out1 to toggle an outboard Classé power amplifier between
operate and standby with your CAP-2100 (to facilitate the operation of
bi-amped systems).
The remote trigger input will respond to the presence of 5–12VDC, with
tip polarity as shown below:
Similarly, the trigger outputs will create a 12VDC signal that can support
up to 100mA of current.
, AMX and Crestron
™ ® ™
17