Running The Dialogic® Brooktrout® Configuration Tool For The First Time - Dialogic Brooktrout TruFax TR1034 User Manual

Running the Dialogic® Brooktrout® Configuration
Tool for the First Time
March 2013
Running the Dialogic® Brooktrout® Configuration Tool for the First Time
When you start the Configuration Tool for the first time, you may get
a box pop up. Only change the locations for the
Preferences Dialog
various files used by the Configuration Tool when requested by your
application.
When the Configuration Tool detects an IP-enabled device, it
displays the
Configure IP Stack
administrator whether you will use the SIP or H.323 IP call control.
If you don't know yet, select "Both (SIP and H323)" so that both
protocol stacks get installed.
None - IP stack not installed
SIP - SIP stack installed (default)
dialog box. Check with your network
64