Configuring Ip Call Control - Dialogic Brooktrout TruFax TR1034 User Manual

Configuring IP Call Control

March 2013
If you want to configure PSTN call control, select Public Switched
Telephone Network (PSTN) and refer to
page 88
Follow the steps below to configure IP Call Control:
1. The following screen appears either after you select Internet
Protocol (IP) Network or if your system supports only IP Call
Control.
2. Select SIP or H.323. Click Next and the following screen appears
if your system is board-based. If your system is software based the
following step is skipped.
Configuring in Wizard Mode
Configuring PSTN on
69