Preparing For Activation - Dialogic Brooktrout TruFax TR1034 User Manual

Preparing for Activation

March 2013
To use the License Manager to activate your Brooktrout product,
perform the activation process from the system where the Dialogic®
Brooktrout® SR140 Fax Software is installed. Once the license is
activated, install the license file on that system (unless you activate
automatically which does not require installation).
Because the SR140 Fax Software is an IP-based technology, Dialogic
uses the IP network and the Internet to perform Product Activation.
Ideally, the system you are installing on should be connected to an
IP Network and to the Internet.
However you activate, Dialogic strongly recommends that you
archive the License Certificate and the License File once the product
has been activated.
Automatic activation must be performed using the License Manager
on the system which is to be licensed.
Note: Because the license verifies if the system clock has been set
back, you should ensure that the system date is set correctly.
Preparing for Activation
28