Configuring PSTN
Protocol Options
Protocol Details
March 2013
Dialogic recommends that you accept the defaults that are based on
the modules the Configuration Tool identified in your system. In this
example, the module uses the T1 ISDN protocol.
Note: In Wizard Mode all the ports of all the modules will be
configured with the same port setting.
Follow the steps below:
1. Click the Show Details >> button.
Note the details of the protocol chosen by the Configuration Tool.
The protocol details appear in the panel below the Protocol Options.
The options are dependent on the protocol chosen.
This example displays the options for the T1 ISDN protocol.
Configuring in Wizard Mode
88