Returning To The Default Configuration - Dialogic Brooktrout TruFax TR1034 User Manual

Returning to the Default Configuration

March 2013
To return to the default configuration, follow the
instructions below:
1. While in the Advanced Mode, click on Options->Preferences. Note
the location of the following files:
The btcall.cfg in the BTCall Configuration field.
The callcnt.cfg in the Call Control Configuration field.
2. Exit from the Configuration Tool.
3. Delete either the btcall.cfg or the callcnt.cfg or both based on
what you would like to reset.
4. Next start the Configuration Tool again.
Returning to the Default Configuration
127