Installing Your Board - Dialogic Brooktrout TruFax TR1034 User Manual

Installing Your Board

March 2013
Before installing your board, make sure you have assigned the board
a unique module number.
Follow these instructions to install your Brooktrout board
into your computer:
1. Power off your PC and any peripheral equipment connected to it.
2. Unplug your PC power cord.
3. Remove the outside cover of your computer.
4. Open your computer and locate a free PCI slot in the computer
chassis.
5. Remove the slot cover.
6. Carefully align the Brooktrout board with the PCI slot and firmly
seat the board into the slot.
7. Tighten the mounting bracket screw to secure the board to the
chassis.
Warning: When installing the board, be sure that the mounting bracket is
securely fastened to the chassis and the chassis is plugged into a
grounded three prong plug. Improper chassis or bracket grounding can
result in harmful or fatal electrical shock as well as component damage.
8. Replace the outside cover of your computer.
9. Use the cable supplied with your board and connect one end of the
cable into the RJ-45 telephone connector on the board's mounting
bracket.
10. Plug the other end of the cable into the connector for your
telephone service.
11. Reconnect your PC power cord, and power on your computer.
Installing Your Board
22