Using At&T Communication Manager - Sierra Wireless USBConnect Lightning Quick Start Manual

Using AT&T Communication
Manager
1. Mobile network interface
The Mobile network portion of the main window allows you
to control your connection to mobile networks worldwide.
2. Wi-Fi network interface
The Wi-Fi network section of the main window allows you
to control your connections with Wi-Fi networks, including
home, office, and public hotspot networks. See page 14 for
more information on using Wi-Fi with ACM.
3. Connect buttons
To connect to a mobile or Wi-Fi network, click the gray
Connect button in the Mobile or Wi-Fi section of the main
window. The button moves to the center and turns blue
while the modem is connecting to the network. When the
connection is established, the button moves to the right and
turns orange. Click the orange button to disconnect from the
network.
4. Cumulative total data used
The total data counter shows the amount of data sent since
the counter was last reset. To show the total, go to Tools >
Diagnostics > Event Viewer and set the desired options.
Being able to view the total helps you avoid going over your
monthly limit. Be sure to return to the Event Viewer
Advanced tab to click Clear Event Log each month when
your new bill cycle starts. For more information on interpret-
ing the amounts of data used, see Frequently Asked Ques-
tions on page 21.
10