Using The Radio Data System (Rds) - Sharp HT-DV40H3 Operation Manual

Using the Radio Data System (RDS)

RDS is a broadcasting service which a growing number of FM
stations provide. These FM stations send additional signals
along with their regular programme signals. They send their
station names, and information about the type of programme
such as sport, music, etc.
When tuned to an RDS station, "RDS" and the station name will be
displayed.
"TP" (Traffic Programme) will appear on the display when the
received broadcast carries traffic information, and "TA" (Traffic
Announcement) will appear whilst a traffic information is on air.
"PTYI" (Dynamic PTY Indicator) will appear whilst the Dynamic PTY
station is received.
You can control the RDS by using the buttons on the remote
control only.
Information provided by RDS
Each time the RDS DISP button is pressed, the display will
switch as follows:
Station name (PS)
Frequency
When tuning in to a station other than an RDS station or to an RDS
station which sends weak signal, the display will change in the
following order:
NO PS
FM 98.80 MHz
1 2 3
4 5 6
7 8 9
0 +10
Programme type (PTY)
Radio text (RT)
NO PTY
NO RT
HT-DV40H3
HT-DV50H3
ENGLISH
E-52