Setting The Clock - Sharp AN-PR1000H Operation Manual

Setting the clock

By setting the unit to the correct time, you can use it not only as a clock but also for
timer playback.
In this example, the clock is set for the 24-hour (0:00) display
1
Hold down the SHIFT button and press the CLOCK button. Within
5 seconds, press the or button to select CLOCK ADJUST and
then press the ENTER button.
2
Hold down the SHIFT button and press the
the 24-hour or 12-hour display and then press the ENTER button.
"0:00" The 24-hour display will appear. (0:00 - 23:59)
"AM 12:00" The 12-hour display will appear. (AM 12:00 - PM 11:59)
"AM 0:00" The 12-hour display will appear. (AM 0:00 - PM 11:59)
Note that this can only be set when the unit is first installed or it has been reset (see
page 39).
3
Hold down the SHIFT button and
press the
hour and then press the ENTER
button.
Press the
advance continuously.
When the 12-hour display is selected, "AM" will change automatically to "PM".
4
Hold down the SHIFT button and
press the
minutes and then press the ENTER
button.
Press the
to advance continuously.
The hour will not advance even if minutes advance from "59" to "00".
The clock starts from "0" second (seconds are not displayed).
The time disappears after approx.5 seconds.
To confirm the time display:
Hold down the SHIFT button and press the DISPLAY button.
The time display will appear for about 5 seconds.
Note:
The "ADJUST" or time will flash at the push of the SHIFT and DISPLAY buttons when
the AC power supply is restored after a power failure or unplugging the unit.
or button to select To readjust the clock:
Perform "Setting the clock" from step 1. If the "ADJUST" is not flashing in step 1, step
2 (for selecting the 24-hour or 12-hour display) will be skipped.
To change the 24-hour or 12-hour display:
1 Clear all the programmed contents. [Refer to "Clearing all the memory (reset)" on
page 39 for details].
2 Perform "Setting the clock" from the beginning.
or button to adjust the
or button once to advance the time by 1 hour. Hold it down to
or button to adjust the
or button once to advance the time by 1 minute. Hold it down
AN-PR1000H
ENGLISH
E-18