Playing 2 Channel Audio; Playing Dolby Digital (5.1 Channel), Dts Or Mpeg Audio - Sharp DV-NC65H Operation Manual

DVD Audio Connections
Connecting a TV Equipped with S-VIDEO Input Jacks
When you want to achieve a better video image by connecting a TV equipped with an S-VIDEO input connector
to the Unit, you should use an S-VIDEO lead (commercially available) to connect the TV to the Unit.
Please note, if the Output Selector Switch is set to RGB, no signal will be output from the S-VIDEO
socket.
Connecting to Audio Equipment
Connecting the Unit to audio equipment provides normal stereo sound plus powerful stereo sound enhanced
by Dolby Digital (5.1 channel), DTS, and MPEG Audio.

Playing 2 channel audio

I Analogue Connection
To S-VIDEO
input jack
S-VIDEO
INPUT
TV (with external input jacks)
If the Unit is set to OPERATE ON, the DVD signals will be output from the DVD OUT jacks at all times.
(The DVD signals will be output from the DVD OUT jacks also when using the VCR.)
22
DVNC65H019_024.pm6
This Unit
S-VIDEO lead
(commercially available)
www.sharp.co.uk/support
22
Required lead
VIDEO/AUDIO lead (commercially available)
White (L)
Red (R)
S-VIDEO lead (commercially available)
S-VIDEO
RGB VIDEO
LINE 2
DVD OUT
OUTPUT DIGITAL
SELECTOR
AUDIO
LINE 1 (TV)
(Red)
S-VIDEO
R
AUDIO
(White)
L
To S-VIDEO
OUT jack
VIDEO/AUDIO lead
(commercially available)
To amplifier
audio input jacks
(White)
(Red)
Amplifier of stereo system, etc.
30/8/02, 11:14 am
White (L)
Red (R)
To AUDIO
OUT jacks
VCR/DVD OUT ANTENNA
R
IN
AUDIO
L
VIDEO OUT
Jack and Plug Colours
Audio Left: White
Audio Right: Red