How To Check, Change, And Cancel A Delayed Recording; Checking A Recording - Sharp DV-NC65H Operation Manual

Timer Recording
11
Press SET to confirm.
• The MENU now shows all the timer settings you have entered.
If you wish to make additional timer recordings, repeat this
procedure.
12
When you have completed entering timer settings, press VCR
MENU to remove the menu from the TV screen.
13
Ensure that the tape on which you wish to record is inserted into
the Unit, then press TIMER ON/OFF once to place the Unit in
TIMER STANDBY mode. G G G G G will be shown on the VCR Front
Panel display and the timer standby indicator will be illuminated.
• If problems persist contact the SHARP Helpline on tel: 08705-274277
(office hours)
• VPS/PDC is a signal broadcast by some TV stations which adjusts the
start and stop time of your VCR recording. This ensures that if there is
a change in broadcast time for your programme the Unit will still
record the whole programme. It is essential that the start time as it
appears in the TV listing is used to program the Unit, as this informa-
tion is used to identify the VPS/PDC signal corresponding to your
programme.
• If the symbol and the red indicator light flashes a video tape has not
been inserted into the Unit.
• If the video tape is ejected when the Unit tries to record the record
protection tab has been removed.
• During recording, press ËSTOP to cancel the recording. If there are
further recordings to be made, the Unit will return to Timer Standby.

How to Check, Change, and Cancel a Delayed Recording

Checking a Recording

You can see on the Timer setting screen a list of all timer
programmes that are already set.
Preparations
• If the Timer Standby symbol G G G G G appears on the VCR Front Panel
Display, press the TIMER ON/OFF to remove the G G G G G symbol.
1
Press ËSTOP to switch on the VCR.
2
Press VCR MENU.
3
Press ' / " to select "TIMER". Press SET to confirm.
• All the delayed recordings in the VCR's memory will be shown.
VIDEOPLUS+
TIMER
MODE
SET UP
SET :ENTER
4
If the settings are correct press VCR MENU to exit.
68
DVNC65H063_070.pm6
MENU
:SELECT
MENU:EXIT
www.sharp.co.uk/support
68
TIMER
OPERATE
VIDEO Plus+ EJECT
ON/OFF
ON VCR/DVD VCR MENU
DISPLAY
SCREEN SELECTOR DVD SETUP
FUNCTION PROG/ OPEN/
ANGLE
CONTROL REPEAT CLOSE
TITLE
DVD MENU
CLEAR SET
RETURN ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
AM/PM INPUT SELECT VCR DVD
/
REV FWD
PLAY
REC
PAUSE/STILL
STOP
TAPE DPSS
SKIP SLOW
SPEED
AUDIO
CH
OUTPUT
VCR DVD
VCR/DVD COMBINATION
RRMCGA069WJSA
30/8/02, 11:50 am