Sharp DV-NC65H Operation Manual page 42

DVD Setup
•
— (Pan & Scan mode): When wide-screen video
4:3 PS
material is played, this mode clips the right and left sides of
the image so that it can be viewed on a conventional TV
screen.
• Some wide-screen DVDs that do not permit Pan & Scan mode
playback are automatically played in letterbox mode (black bands
top and bottom).
•
— (Letterbox mode): When wide-screen video material
4:3 LB
is played in this mode on a conventional TV screen, black
bands appear at the top and bottom of the screen.
•
— (Wide-screen TV): This is the correct mode for playing
16 : 9
wide-screen videos on a wide-screen TV.
• You must also set the screen mode on your wide-screen TV to
"FULL".
6
Press ENTER to confirm the "TV MODE" setting.
• When you have completed the setting above, press RETURN
to exit the SETUP screen.
42
DVNC65H040_042.pm6
www.sharp.co.uk/support
42
Cut off when a wide-screen video
image is played.
The actual appearance of the image
depends on the screen mode setting
of your wide-screen TV.
30/8/02, 11:38 am