Tape Playback; Listening To A Cassette Tape (Tape 1 Or Tape 2) - Sharp CD-G10000DVD Operation Manual

Listening to a cassette tape (TAPE 1 or TAPE 2)

Before playback:
I For playback, use normal or low-noise tapes for the best
sound. (Metal or CrO tapes are not recommended.)
2
I Do not use C-120 tapes or poor-quality tapes, as they may
cause malfunctions.
I Before loading a tape into the cassette compartment, tighten
the slack with a pen or a pencil.
CD-G10000DVD
*CD-G10000DVD(EN)58-59 58
Tape 1 playback
H
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TAPE (1V2) button to select TAPE 1.
3
Open the cassette door by pushing the area marked "7".
4
Load a cassette into the TAPE 1
cassette compartment with the
side to be played facing towards
you.
5
Press the 0 button to start playback.
Auto power on function:
When you press any of the following buttons, the unit turns on.
I TAPE (1 V 2 ) button (main unit and remote control): The unit turns on and
the "TAPE" function is activated.
I 0 button on the remote control or main unit: The unit turns on and playback
of the last function starts (DVD/CD, TAPE, TUNER, GAME).
05.1.17, 10:51
CD-G10000DVD (S)
TINSZA160AWZZ
CD-G10000DVD
CP-G10000
ENGLISH
7
E-58