Using The Function Control - Sharp CD-G10000DVD Operation Manual

Using the function control

About the function control screen
H
Using function control, you can check at a glance and change the current set-
tings of the following items: subtitle, angle, audio, digital gamma and digital
super picture.
Function control also allows you three ways of direct skips (title, chapter and
time).
I Whilst the disc is playing, press the SET UP button whilst pressing down
the SHIFT button to display the screen shown below.
I Pressing the cursor or button changes the currently selected item.
Note:
To exit the setup operation, press the RETURN button. This returns to the
screen that was shown before the setup screen was displayed.
1
1. Direct title skip
2. Direct chapter skip
2
3. Direct time skip
4. Subtitle 3
5. Angle
4
6. Audio
5
7. 3-D Virtual surround
8. Digital gamma
6
9. Digital super picture
7
8
9
BITRATE indicates the amount of data that
is being transferred to the unit per second.
However, note that picture quality is not
always in proportion to the bit rate.
*CD-G10000DVD(EN)36-39 36
2 5 /
8 3 / 0
DVD
0 1 : 3 0 0 8 :
2 E NG L I S H
1
1 1 5. h c
D
ON
0 0 10
ON
BIT RATE
G Mbps
ON
SELECT
S
ENTER ENTER RETURN
1 Direct title skip (page 37)
I The number of the title currently played back is displayed.
I You can skip directly to the desired title.
2 Direct chapter skip (page 37)
I The number of the chapter currently played back is displayed.
I You can skip directly to the desired chapter.
3 Direct time skip (page 38)
I Elapsed time from the beginning of the disc is displayed.
I You can skip directly to the point from which you want to start playback.
4 Subtitle language setting (page 38)
I The subtitle number and language currently selected are displayed.
(When a disc with no subtitle is played back, "xx" is displayed.)
I You can select the desired subtitle language.
5 Angle setting (page 38)
I The current angle is displayed. (When a disc with no angle is played
back, "xx" is displayed.)
I You can select the desired angle.
6 Audio setting (page 39)
I The type of audio currently selected is displayed.
I You can select the desired type of audio.
7 3-D virtual surround setting (page 39)
I Only function if Dolby Disc recorded DVD is played.
I You can activate/deactivate the setting or change the level.
8 Digital gamma setting (page 40)
G
I You can make the entire image easier to see by brightening the darker
and obscure portions.
I You can activate/deactivate the setting or change the level.
9 Digital super picture setting (page 41)
S
I This function enhances the fine details of the image and outlines of
the objects by reducing the amount of picture noise.
I You can activate/deactivate the setting or change the level.
Note:
In function control mode, you can return to the previous setting screen by
pressing the RETURN button or the SET UP button whilst pressing down the
SHIFT button.
05.1.17, 10:49
CD-G10000DVD (S)
TINSZA160AWZZ
CD-G10000DVD
CP-G10000
ENGLISH
7
E-36