Sharp CD-G10000DVD Operation Manual page 62

Recording to a cassette tape (continued)
CD-G10000DVD
CP-G10000
ENGLISH
E-61
*CD-G10000DVD(EN)60-65 61
5 -DISC
CHANGER
DVD MINI SYSTEM
CD-G10000DVD
RRMCGA015AWSA
Recording from a DVD (DVDs)
H
1
Press the ON/STAND-BY button to turn the power on.
2
Load a cassette into the TAPE 2 cassette compartment with
the side A facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
3
Press the DVD/CD button and load the desired disc.
4
Press one of the s 1 - s 5 buttons to select the disc to be
recorded.
5
Press the 0 button to start DVD playback.
If the disc you are using supports auto start, it starts to play automatically
(even if you do not press the 0 button), as soon as you close the disc
tray.
6
Press the button to choose one side or both sides.
... To record on both sides.
... To record on only one side.
7
Press the I6 button.
Recording will be paused.
8
When DVD playback reaches the desired point, press the
0 button to start recording on
side A or the 1 button for side
B.
To stop recording:
Press the I button.
I It will stop the tape only. Another press of the I button will stop DVD playback.
I Even when the DVD playback is finished, the tape will not stop. To stop the
tape, press the I button.
05.1.17, 10:51
CD-G10000DVD (S)
TINSZA160AWZZ