Listening To The Radio - Sharp CD-G10000DVD Operation Manual

Listening to the radio (continued)
CD-G10000DVD
CP-G10000
ENGLISH
Memorising a station
H
You can store 40 AM and FM stations in memory and recall them at the push of
a button. (Preset tuning)
1
Perform steps 1 - 3 in "Tuning" on page 56.
2
Press the MEMORY/SET (MEMORY/DIMMER) button to
enter the preset tuning saving mode.
3
Within 30 seconds, press the PRESET (X or W) button to
select the preset channel number.
Store the stations in memory, in order, starting with preset channel 1.
4
Within 30 seconds, press the MEMORY/SET (MEMORY/
DIMMER) button to store that station in memory.
If the "MEMORY" and preset number indicators go out before the station
is memorised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a
preset station.
When a new station is stored in memory, the station previously
memorised for that preset channel number will be erased.
Note:
The backup function protects the memorised stations for a few hours should
there be a power failure or if the AC lead is disconnected.
To recall a preset station
H
1. Press the PRESET (X or W) button for less than 0.5 seconds to select the
desired station.
E-57
*CD-G10000DVD(EN)56-57 57
To scan the preset stations
H
The stations saved in memory can be scanned automatically. (Preset memory
scan)
1. Press the PRESET (X or W) button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be tuned in
sequentially, for 5 seconds each.
2. Press the PRESET (X or W) button again when the desired station is
located.
5 -DISC
CHANGER
DVD MINI SYSTEM
CD-G10000DVD
To erase entire preset memory
H
1. Press the ON/STAND-BY button to enter the stand-by mode.
2. Whilst pressing down the I6 button and the X-BASS/DEMO button, press
the CLOCK/TIMER button until "TUNER CL" appears.
05.1.17, 10:50
CD-G10000DVD (S)
TINSZA160AWZZ