Sharp CD-G10000DVD Operation Manual page 56

Playing karaoke (continued)
CD-G10000DVD
CP-G10000
ENGLISH
To change the audio mode
H
Sound of the playback source can be switched among the STEREO, L-CH, R-
CH, and V-CANCEL (VOCAL CANCEL) modes.
The audio mode function is used when the left and right channels have individual
signals from each other.
Press the KARAOKE button whilst pressing down
the SHIFT button on the remote control until the
desired audio mode is displayed.
Each time the KARAOKE button is pressed, the mode
will change as follows:
STEREO L-CH
STEREO Sounds on the left and right channels are played.
L-CH Sounds on the left channel only are played.
R-CH Sounds on the right channel only are played.
V-CANCEL The main vocal is lowered.
Notes:
I The initial audio mode setting is "STEREO".
I In any mode other than the STEREO mode, "
I The setting will remain unchanged when you change the disc, you set the
unit to the stand-by mode or the function is changed from the CD to another
function.
I When playing a sound multiplexed disc on which a vocal and music have
been separately recorded, select the audio mode as desired.
To change general stereo source to karaoke
H
source
Even ordinary discs and tapes not recorded specifically for karaoke can be
used for karaoke just by toning down the main vocal.
Press the KARAOKE button whilst pressing down the SHIFT button on
the remote control until "V -CANCEL" appears in the display.
" " will appear.
E-55
*CD-G10000DVD(EN)54-55 55
Notes:
I Use discs recorded in stereo. The function will not work with mono sources.
I With some discs and tapes the original vocals may still be heard.
Notes on sound multiplexed karaoke discs:
Sound multiplexed karaoke discs are discs on which the main vocal and the
BGM (Background music) have been recorded on one of the two channels and
only the BGM on the other.
I The function will not work properly with discs which do not belong to this
I Discs on which vocal has been recorded on the left channel and music on
R-CH
V-CANCEL
H
You can record mixed sound from the microphone and DVD/CD, TUNER, TAPE 1
or GAME/VIDEO.
1. Perform steps 1 - 3 in "Playing karaoke" on page 54.
2. Press the DVD/CD, TUNER (BAND), TAPE (1V2) or GAME/VIDEO button
I To record mixed sound from TAPE 1, press the TAPE (1V2) button and
3. Load a cassette into the TAPE 2 cassette compartment with side A facing
4. Perform steps 5 - 7 in "Playing karaoke" on page 54.
5. Press the
" will appear.
6. Press the I6 button.
7. Press the 0 button to record on side A, or the 1 button for side B.
H
1. Perform step 1 above.
2. Press the TAPE (1V2) button until "TAPE 2" appears on the display.
3. Perform steps 3 - 7 above.
group.
the right may not play properly.
Recording of mixed sound to a cassette tape
to select the audio source.
select "TAPE 1".
you.
button to choose one side or both sides.
Recording of the microphone signals only to a
cassette tape
05.1.17, 10:50
CD-G10000DVD (S)
TINSZA160AWZZ