Setting The Clock - Sharp CD-G10000DVD Operation Manual

Setting the clock

CD-G10000DVD
CP-G10000
ENGLISH
In this example, the clock is set for the 24-hour (0:00) display.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the 5 3 or 2 4 button to
select "CLOCK", and press the MEMORY/SET button.
4
Press the 5 3 or 2 4 button to select 24-hour or 12-
hour display and then press the MEMORY/SET button.
→ The 24-hour display will appear.
"0:00"
(0:00 - 23:59)
"AM 12:00" → The 12-hour display will appear.
(AM 12:00 - PM 11:59)
→ The 12-hour display will appear.
"AM 0:00"
(AM 0:00 - PM 11:59)
E-19
*CD-G10000DVD(EN)18-19 19
5 -DISC
CHANGER
DVD MINI SYSTEM
CD-G10000DVD
5
Press the 5 3 or 2 4 button to adjust the hour and
then press the MEMORY/SET button.
Press the 5 3 or 2 4 button once to advance the time by 1
hour. Hold it down to advance continuously.
6
Press the 5 3 or 2 4 button to adjust the minutes
and then press the MEMORY/SET button.
Press the 5 3 or 2 4 button once to advance the time by 1
minute. Hold it down to change the time in 5-minutes intervals.
To confirm the time display:
[When the unit is in the stand-by mode]
Press the CLOCK/TIMER button.
The time display will appear for about 10 seconds.
[When the power is on]
Press the CLOCK/TIMER button.
Within 10 seconds, press the 5 3 or 2 4 button to display the time.
The time display will appear for about 10 seconds.
Note:
The "CLOCK" will appear or time will flash to confirm the time display when the
AC power supply is restored after a power failure or unplugging the unit. If
incorrect, readjust the clock as follows.
To readjust the clock:
Perform "Setting the clock" from step 1. If the "CLOCK" does not appear in step
3, step 4 (for selecting the 24-hour or 12-hour display) will be skipped.
To change the 24-hour or 12-hour display:
1 Clear all the programmed contents. [Refer to "Clearing all the memory
(reset)" on page 74 for details.]
2 Perform "Setting the clock" from step 1.
Note:
The clock can also be set with the remote control.
05.1.17, 10:47
CD-G10000DVD (S)
TINSZA160AWZZ