TYAN S4992 Manual page 78

3.5.6.8 Event Log Settings
Important events like a login failure or a firmware update are logged to a
selection of logging destination. Each of those events belongs to an event group
which can be activated separately. The common way to log events is to use the
internal log list of the KVM-over-IP Sever Management. To show the log list,
click on the item "Event Log" from the section "Maintenance". In the Event Log
Settings you can choose how many log entries are shown on each page.
Furthermore, you can clear the log file here.
List logging enabled
To log events you may use the internal log list of the KVM-over-IP Sever
Management. To show the log list, click on "Event Log" on the "Maintenance"
page. Since the KVM-over-IP Sever Management system memory is used to
save all the information, the maximum number of possible log list entries is
restricted to 1,000 events. Every entry that exceeds this limit overrides the
oldest one automatically.
NFS Logging enabled
Define a NFS server where a directory or a static link has to be exported to, in
order to write all logging data to a file that is located there. To write logging data
from more than one KVM-over-IP Sever Management card to only one NFS
share, you have to define a file name that is unique for each device. When you
72
http://www.TYAN.com