Table of Contents
Advertisement
IP address in the usual dot notation.
Subnet Mask
The net mask of the local network.
Gateway IP address
In case the KVM-over-IP Sever Management should be accessible from
networks other than the local one, this IP address must be set to the local
network router's IP address.
Primary DNS Server IP Address
IP address of the primary Domain Name Server in dot notation. This option may
be left empty,however the KVM-over-IP Sever Management will not be able to
perform name resolution.
Secondary DNS Server IP Address
IP address of the secondary Domain Name Server in dot notation. It will be
used in case the Primary DNS Server cannot be contacted.
Miscellaneous Network Settings
Remote Console and HTTPS port
Port number at which the KVM-over-IP Sever Management Remote Console
server and HTTPS server are listening. If left empty, the default value (port 444)
will be used.
HTTP port
Port number at which the KVM-over-IP Sever Management HTTP server is
listening. If left empty, the default value(port 80) will be used.
Telnet port
Port number at which the KVM-over-IP Sever Management Telnet server is
listening. If left empty, the default value (port 25) will be used.
SSH port
Port number at which the KVM-over-IP Sever Management SSH (Secure SHell)
server is listening. If left empty, the default value (port 22) will be used.
Bandwidth Limit
The maximum network traffic generated through the KVM-over-IP Sever
Management Ethernet device. Value in Kbit/s.
Enable Telnet
This enables the Telnet client mode.
Enable SSH
This enables the SSH (Secure SHell) client mode.
62
http://www.TYAN.com
Advertisement
Table of Contents
