Table of Contents
Advertisement
4.7.3
Super I/O Configuration Sub-Menu
You can use this screen to select options for the Super I/O settings.
Use the up and down arrow ( / ) keys to select an item. Use the
Plus and Minus (+/-) keys to change the value of the selected option.
Main
Advanced
Configure Win627 Super I/O Chipset
Serial Port1 Address
Chassis Intrusion Detect
Watchdog Mode
Feature
Configure Win627 Super I/O Chipset
Serial Port1
Address
Chassis
Intrusion
Detect
Watchdog
Mode
BIOS Setup Utility
PCI/PnP
Option
3F8 IRQ4
3E8 IRQ4
Allow BIOS to select Serial Port1 Base
Addresses.
2E8 IRQ3
Disabled
Enable/Disable the function of chassis
Disabled
intrusion detection. When chassis open
event is detected, BIOS will record the
Enabled
event.
Disabled
2 Minutes
Watchdog Timer sets 2/4/6/8/10 minutes.
4 Minutes
When WD time-out occurs, system will auto
6 Minutes
reboot.
8 Minutes
10 Minutes
95
http://www.TYAN.com
Boot
Security
Allows BIOS to
enable or disable
Floppy Controller.
← → Select Screen
[3F8/IRQ4]
[Disabled]
↑↓ Select Item
[Disabled]
+/-
F1
F10 Save and Exit
ESC Exit
Description
Chipset
Exit
Change Option
General Help
Advertisement
Table of Contents
