TYAN S4992 Manual page 74

1. Create a SSL Certificate Signing Request. You need to fill out a number of
fields that are explained below. Once this is done, click on the button "Create"
which will initiate the Certificate Signing Request generation. The CSR can be
downloaded to your administration machine with the "Download CSR" button.
2. Send the saved CSR to a CA for certification. You will get the new certificate
from the CA after a more or less complicated traditional authentication process
(depending on the CA).
3. Upload the certificate to the OPMA module using the "Upload" button.
After completing these three steps, KVM-over-IP Sever Management has its
own certificate that is used for identifying the card to its clients.
Common name
This is the network name of KVM-over-IP Sever Management once it is installed
in the user's network (usually the fully qualified domain name). It is identical to
the name that is used to access KVM-over-IP Sever Management with a web
browser but without the prefix "http://". In case the name given here and the
actual network name differ, the browser will pop up a security warning when
KVM-over-IP Sever Management is accessed using HTTPS.
Organizational unit
This field is used for specifying to which department within an organization the
KVM-over-IP Sever Management host system belongs.
Organization
The name of the organization to which the KVM-over-IP Sever Management
host system belongs.
Locality/City
The city where the organization is located.
State/Province
The state or province where the organization is located.
Country (ISO code)
The country where the organization is located. This is the two-letter ISO code,
e.g. DE for Germany, or US for the U.S.
Challenge Password
Some certification authorities require a challenge password to authorize later
changes on the certificate (e.g. revocation of the certificate). The minimal length
of this password is four characters.
Confirm Challenge Password
68
http://www.TYAN.com