TYAN S4992 Manual page 76

3.5.6.6 Date and Time
In this panel, you can set up where the internal real time clock of KVM-over-IP
Sever Management comes from. You have the possibility to adjust the clock
manually or to use a NTP time server. Without a time server your time setting
will not be persistent, so you have to wait BIOS to adjust it again after KVM-
over-IP Sever Management loses power for more than a few minutes(Our
motherboard BIOS will set its time to KVM-over-IP Sever Management). To
avoid this you can use a NTP time server which sets up the internal clock
automatically to the current UTC time. Because NTP server time is always UTC,
there is a setting that allows you to set up a static offset to get your local time.
70
http://www.TYAN.com