Table of Contents
Advertisement
JP24
JP4: PCI-E Configuration Selection
Pins 1-2 (Default):
If a x16 speed card is installed in slot 4, then the card installed will run at x16 speed
and slot 3 will be disabled.
If a x8 (or lower) card is installed on Slot 4, then the installed card will run at x8 (or
lower) speed and slot 3 will be active and run at a maximum of x8 speeds.
Pins 2-3:
If this jumper is set to pins 2 -3, then both slot 3 and 4 will be locked at x8 speed for
both slots regardless of the speed of card installed.
JP4
JP22
14
http://www.TYAN.com
Advertisement
Table of Contents
