Installing The Processor - TYAN S4992 Manual

2.4 - Installing the Processor

Your brand new S4992 supports the latest 64-bit processor technology from
®
AMD . Only AMD
supported with this motherboard.
Check our website for latest processor support.
®
TYAN is not liable for damage as a result of operating an unsupported
configuration.
The diagram is provided as a visual guide to help you install the socket
processor and may not be an exact representation of the processor you have.
Step 1: Take off the CPU protection cap.
Step 2: Pull the CPU lever up to unlock the CPU socket (A). Then open the
socket in the direction as shown (B).
Step 3: Place the CPU on the CPU socket, ensuring that pin 1 is located in the
right direction.
Step 4: Close the CPU socket cover (A) and press the CPU socket lever down
to secure the CPU (B).
Take care when installing the processor as it has very fragile
connector pins below the processor and can bend and break
if inserted improperly.
®
Opteron™ Rev. F 8000 series processors are certified and
http://www.TYAN.com
http://www.TYAN.com
18