Additional Features - Sharp AQUOS LC-40LE822E Operation Manual

Other useful features

Additional features

Option
Colour system
You can change the colour system to one that is
compatible with the image on the screen.
Go to "Menu" > "Setup" > "Option" > "Colour
system".
NOTE
• The factory preset value is "Auto".
• If "Auto" is selected, the colour system for each channel is
automatically set. If an image does not display clearly, select
another colour system (e.g., "PAL", "SECAM").
Option
Headphone/Audio out select
You can select which device is used for outputting audio.
Go to "Menu" > "Setup" > "Option" >
"Terminal setting" > "Headphone/Audio out
select".
Headphone Output audio through headphones.
Output audio through an A/V receiver or
Audio out
surround audio controller.
CAUTION
• This terminal is also used for headphones. Reduce the volume
before using headphones. Overwhelming sound may damage
your hearing.
NOTE
• If you select "Audio out" when a cable is inserted in the HDMI
2/EXT 3 AUDIO (L/R) terminal, the TV speakers are muted.
• When you select "Audio out", you can adjust the TV sound
volume with the Yl/k buttons on the TV or i+/-
buttons on the remote control unit.
Item
Option
Channel selecting effect
This function shows a screen effect when choosing or
changing channels.
Go to "Menu" > "Setup" > "Option" > "Screen
effect" > "Channel selecting effect".
Option
Illumination
This function makes the LED on the front of TV
illuminated in several ways.
Go to "Menu" > "Setup" > "Option" >
"Illumination".
Off The LED is not illuminated.
The LED is illuminated while the TV is in
Standby
standby mode.
The LED is illuminated while you watch
Watch
TV.
Always The LED is illuminated all the time.
NOTE
• The factory default for this item is "Watch". Set to "Off" if you do
not want the LED to illuminate.
Item
43