Selecting An External Video Source; Selecting A Sound Mode - Sharp AQUOS LC-40LE822E Operation Manual

Watching TV
Selecting an external video
source
Once the connection
is made, press b to
display the "INPUT" screen,
and then press b or
a/b to switch over to the
appropriate external source
with ;.
NOTE
• You can also select an
external video source from
"CH list" > "INPUT".
CH list
INPUT
TV
Switchable

Selecting a sound mode

E
DTV/SAT mode
If multi sound modes are received, each time you press
7 the mode switches as follows.
Audio (ENG)
L/R
Audio (ENG)
CH A
Audio (ENG)
Press c/d to select L or R sound when the STEREO or
DUAL MONO screen is displayed.
Audio (ENG)
L/R L
NOTE
• The sound mode screen disappears in six seconds.
• Selectable items vary depending on the received broadcasts.
E
ATV mode
Each time you press 7, the mode switches as shown
in the following tables.
NICAM TV broadcasts selection
Signal Selectable items
Stereo NICAM STEREO, MONO
NICAM CH A, NICAM CH B, NICAM CH AB,
Bilingual
MONO
Monaural NICAM MONO, MONO
A2 TV broadcasts selection
Signal Selectable items
Stereo STEREO, MONO
Bilingual CH A, CH B, CH AB
Monaural MONO
NOTE
• When no signal is input, the sound mode will display "MONO".
STEREO
L R LR
CH A
CH B CH AB
MONO
STEREO
R LR
17