Sharp LC-46LE810E Service Manual

TopPage
In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its orig-
inal condition and only parts identical to those specified should be used.
SAFETY PRECAUTION
IMPORTANT SERVICE SAFETY PRE-
CAUTION ............................................... . ............i
Precautions for using lead-free solder ... . ...........ii
End of life disposal ................................. . .......... iii
OUTLINE
MAJOR SERVICE PARTS ..................... . ..........iv
CHAPTER 1. SPECIFICATIONS
[1] SPECIFICATIONS ................................. . ....... 1-1
CHAPTER 2. OPERATION MANUAL
[1] OPERATION MANUAL .......................... . ....... 2-1
CHAPTER 3. DIMENSIONS
[1] DIMENSIONS (LC-40LE810E/LX810E). . ....... 3-1
[2] DIMENSIONS (LC-46LE810E/LX810E). . ....... 3-2
CHAPTER 4. REMOVING OF MAJOR PARTS
[1] REMOVING OF MAJOR PARTS
(LC-40LE810E/LX810E) ........................ . ....... 4-1
[2] REMOVING OF MAJOR PARTS
(LC-46LE810E/LX810E) ........................ . ....... 4-6
Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the
safety and performance of the set.
SERVICE MANUAL
LCD COLOUR TELEVISION
LC-40LE810E
LC-46LE810E
LC-40LX810E
LC-46LX810E
MODELS
CONTENTS
CHAPTER 5. ADJUSTMENT
[1] ADJUSTMENT PROCEDURE ......................5-1
CHAPTER 6. TROUBLESHOOTING TABLE
[1] TROUBLESHOOTING TABLE ......................6-1
[2] LED flashing specification at the time of the
error .............................................................6-13
CHAPTER 7. MAJOR IC INFORMATIONS
[1] MAJOR IC INFORMATIONS .........................7-1
CHAPTER 8. OVERALL WIRING/BLOCK DIAGRAM
[1] OVERALL WIRING DIAGRAM
(LC-40LE810E/LX810E)................................8-1
[2] OVERALL WIRING DIAGRAM
(LC-46LE810E/LX810E)................................8-2
[3] SYSTEM BLOCK DIAGRAM .........................8-3
Parts Guide
LC-40/46LE810E, LC-40/46LX810E
No. S30E940LE810E
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.