Other useful features
Setting when using external
devices
Input source settings
Option
Input select
For setting the signal type of external equipment.
1
Press b to select the input source for
setting the input signal ("EXT 1" or "EXT 3")
from the "INPUT" menu, and then press ;.
2
Go to "Menu" > "Setup" > "Option" >
"Terminal setting" > "Input select".
EXT 1
Y/C, CVBS, RGB
EXT 3
COMPONENT, RGB
NOTE
•
If no (colour) image displays, try changing to another
signal type.
•
Check the operation manual of the external equipment for the
signal type.
Option
Input label
You can label each input source with a custom
description.
1
Press b to select the desired input source
from the "INPUT" menu, and then press ;.
2
Go to "Menu" > "Setup" > "Option" >
"Terminal setting" > "Input label".
Press a/b/c/d to select each character of
3
the new name for the input source, and then
press ;.
42
Item
CLEAR
BACK
END
4
Repeat until the label is fully spelt out.
NOTE
•
The label can be six characters or less.
•
When you want to set an input source label of less than six
characters, select "END" to set the name.
CH list
TV
NOTE
•
You cannot change labels if the input source is "TV" or "USB".
Skipping specified inputs
Option
Input skip
This setting allows you to skip the SCART, HDMI, RGB,
ATV, DTV or SAT input on the input source selection
operation.
Go to "Menu" > "Setup" > "Option" > "Input
skip".
Setup
Terminal setting
Input skip
NOTE
•
When you select "ATV", "DTV" or "SAT", the skip function works
only when using the # b button on the front of the TV.
INPUT
Switchable
[Yes]
[No]
[No]
[No]
[No]
[No]