Before Turning On The Power; Inserting The Ca Card Into The Ci Module - Sharp AQUOS LC-40LE822E Operation Manual

Quick guide

Before turning on the power

1

Standard DIN45325 plug (IEC 169-2) 75 q coaxial cable

Satellite antenna cable

AC cord (product shape varies in some countries)

Check that the MAIN POWER switch on the rear of the TV is turned on
(;).

Cable clamp (bundle the cables with the clamp)

Inserting the CA card into the CI module

In order to receive coded digital stations, a common interface module (CI module) and a CA card must be inserted in the
CI slot of the TV.
1 Carefully insert the CI module in
the CI slot with the contact side
forward.
2 The logo on the CI module must
be facing outward from the rear
of the TV.
NOTE
• It takes about 30 seconds to certify the license key when you insert a CA card into the CI+ compatible CI module for the first time. This
process may fail when there is no antenna input or you have never run "Auto installation".
• The CI+ compatible CI module sometimes upgrades its firmware. You may not receive any TV images before upgrading. You can only use
the power button during upgrading.
• The CI+ compatible CI module does not allow you to output any copy protected programmes using monitor out. In this case, the copy
protect icon* is shown in the programme information when P. INFO is pressed.
Protect icon: X
*
• If the TV displays an update confirmation message for the CA card while receiving CI+ compatible broadcasts, follow the screen prompts.
• Make sure that the CI module is properly inserted.
10
2
Checking CI module information
Go to "Menu" > "Setup" > "Option" > "CI menu".
• This menu is only available for digital stations.
• The content of this menu depends on the provider of the CI module.
Module
General information on CI module displays.
Menu
Adjustment parameters of each CA card displays.
Enquiry
You can input numerical values such as passwords here.
Place the TV close to the AC outlet,
and keep the power plug within
reach.