Scart Connection; Component Connection - Sharp AQUOS LC-40LE822E Operation Manual

Connecting external devices

SCART connection

Example of connectable devices
E
VCR
E
DVD player/recorder
VCR

SCART cable (supplied accessory)/Conversion
cable

SCART cable
NOTE
• In cases when the decoder needs to receive a signal from
the TV, make sure to select the EXT 1 terminal to which the
decoder is connected in "Manual adjust" in the "Analogue
setting" menu (Page 34).
• You cannot connect the VCR with decoder using a fully wired
SCART cable when selecting "Y/C" under "EXT 1" in the "Input
select" menu.
You will enjoy accurate colour reproduction and high
quality images through the EXT 3 terminal when
connecting a DVD player/recorder or other device.
Decoder

Component connection

Y P P
B R
C C
( B) ( R)
Example of connectable devices
E
VCR
E
DVD player/recorder
R L
AUDIO

Stereo conversion
cable*
* The supplied conversion cable (AV cable) is only used for
the EXT 2 terminal, not for the Audio IN/OUT terminal. Use a
stereo conversion cable (commercially available) instead.
E
After connecting
You must select the appropriate input source and
input signal settings for component connection to
enjoy high quality image through the EXT 3 terminal.
Selecting the component signal
1
Press b to select "EXT 3" from the
"INPUT" menu, and then press ;.
2
Go to "Menu" > "Setup" > "Option" >
"Terminal setting" > "Input select" >
select "COMPONENT".
Setting audio output
Go to "Menu" > "Setup" > "Option" >
"Terminal setting" > "PC input" > "Audio
select" > select "Video+Audio".
(G) (B) (R)
Y P P
B R
(C ) (C )
B R
COMPONENT

RGB component
cable (supplied
accessory)/
Conversion cable
23