Other Useful Features; Setting When Using External Devices; Input Source Settings; Skipping Specified Input - Sharp Aquos LC-32B20E Operation Manual

other useful features

Setting when using external devices

input source settings

option
input Select
For setting the signal type of external equipment.
item
eXt 1: Y/C, CVBS, RGB
eXt 2: Y/C, CVBS, RGB
eXt 3: Auto, S-VIDEO, VIDEO
note
• if no (colour) image displays, try changing to another
signal type.
• Check the operation manual of the external equipment for
the signal type.
• When the signal type is set to "Auto", the input terminal
where a cable is connected is automatically selected.
Setup
input label
You can assign each input source a label as you prefer.
1
Press b to select the desired input source.
2
Go to MENU> Setup> Input Label.
3
Press a/b/c/d to select each character of
the new name for the input source, and then
press oK.
DVD
A B C D E
K L M N O
U V W X Y
0 1 2 3 4 5 6 7 8 9
4
Repeat until the name is fully spelt out.
note
• The name can be 6 characters or less.
• When you want to set an input source name of less than 6
characters, select "END" to set the name.
INPUT SOURCE
TV
note
• You cannot change labels if the input source is TV.

F G H I J CLEAR
P Q R S T BACK
Z + – . _
END
EXT1
EXT2
EXT3
DVD
EXT5
EXT6

Skipping specified input

Setup
input Skip
This setting allows you to skip the SCART, HDMI or
RGB input on the "Input Select" menu.
EXT 1 (SCART)
EXT 2 (SCART)
EXT 4 (HDMI)
EXT 5 (HDMI)
EXT 6 (HDMI)
EXT 7 (RGB)

Colour system settings

option
Colour System
You can change the colour system to one that is
compatible with the image on the screen.
note
• The factory preset value is "Auto".
• If "Auto" is selected, the colour system for each channel
is automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, SECAM).

additional features

Setup
Standby mode
You can reduce the TV's start-up time after turning on
the power with the remote control unit.
item
mode1: The TV quickly starts up from standby.
30W or more of power consumption is required.
mode2: Power consumption is small during standby.
Y es No