Power Save Settings - Sharp AQUOS LC-40LE822E Operation Manual

Basic adjustment

Power save settings

Go to "Menu" > "Setup" > "ECO".
CH list
:Enter :Back
ECO
ECO picture control
This function automatically detects the image source and
decreases the power consumption while keeping the
brightness of the image unchanged.
NOTE
• This function does not work when "AV mode" is set to
"DYNAMIC (Fixed)" or "AUTO".
• This function does not work when "Energy save" is set to
"Standard" or "Advanced".
ECO
Energy save
This function enables you to reduce the backlight
brightness in order to decrease the power consumption
and increase the backlight life span as shown in the
following table.
Standard Reduces the backlight brightness.
Reduces the backlight brightness more
Advanced
than "Standard".
The backlight brightness is the same
Off value of your settings in the selected
"AV mode".
NOTE
• This function does not work when "AV mode" is set to
"DYNAMIC (Fixed)".
Menu
Setup
ECO
ECO picture control
[On]
Energy save
[Off]
No signal off
[Disable]
No operation off
[Disable]
Item
E
"Energy save" status icons
Icon
"Energy save" is set to "Standard".
"Energy save" is set to "Advanced".
When "Energy save" is set to "Standard" or "Advanced",
"Energy save" status icons appear in the "Picture" menu
and channel information windows.
ECO
No signal off
When set to "Enable", the TV will automatically enter
standby mode if there is no signal input for 15 minutes.
NOTE
• Even if a TV programme finishes, this function may not operate
because of interference from other TV stations or other signals.
ECO
No operation off
The TV will automatically enter standby mode if no
operations are performed in three hours if "Enable" is
selected.
NOTE
• Five minutes before the TV enters standby mode, the remaining
time displays every minute.
ECO
Sleep timer
Allows you to set a time when the TV automatically enters
standby mode. You can set the time span for entering
standby mode after selecting "Change".
NOTE
• Select "Off" to cancel the sleep timer.
• When the time has been set, countdown automatically starts.
• Five minutes before the preset of time expires, the remaining
time displays each minute.
ECO
Audio only
When listening to music from a music programme, you
can set the TV off and enjoy audio only.
On Audio is output without a screen image.
Both screen images and audio are
Off
output.
Description
Item
31