Preparation
Attaching the stand unit
•
Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged.
CAUTION
•
Attach the stand in the correct direction.
•
Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1
Confirm that there are nine screws (four long
screws and five short screws) with the stand
unit.
2
Attach the supporting post for the stand unit
onto the base using the four long screws with
a screwdriver as shown.
Supporting
post
3
Insert the stand into the openings on the
bottom of the TV (hold the stand so it will not
drop from the edge of the base area).
Soft cushion
4
Insert and tighten four short screws into the
four holes on the rear of the TV.
5
Attaching the stand cover.
1
Slide the stand cover into the two catches on
the stand base.
2
Insert and tighten a short screw into the hole
on the centre of the stand cover.
NOTE
•
To detach the stand unit, perform the steps in reverse order.
•
A screwdriver is not supplied with this product.
•
The stand base is made of glass. Therefore, be careful not to
drop the stand base or apply pressure to it.
•
Do not place heavy objects on the stand base.
7