Channel Settings; Auto Installation; Digital Channel Settings - Sharp Aquos LC-32DH77E Operation Manual

Basic adjustment

Channel Settings

Auto Installation

Setup
Auto Installation
The TV automatically detects and stores all available
services in your area. This function also allows you to
perform the channel setting for digital and analogue
individually and reconfigure the settings after the initial
auto installation has been completed.
After selecting "Yes" on the screen, you can set
language and channel search the same as in the
initial auto installation. Follow steps 2, 5 and 6
on page 9.
NOTE
• PIN input is required when executing "Auto Installation".
The default PIN is "1234". To change the PIN setting, refer
to Password/Parental lock settings on page 28. To
clear the PIN setting (PIN input will no longer be needed),
refer to CLEARING THE PIN on page 40.
• You cannot set the Home/Store setting and the country
setting in "Auto Installation" in the "Setup" menu. If you
want to reconfigure those settings, automatically execute
initial auto installation after executing "Reset" from the
"Setup" menu.
• The current country setting is displayed on the screen.

Digital channel settings

Setup
Programme Setup
Digital Setting
You can reconfigure the DTV service settings
automatically or manually.
NOTE
• PIN input is required when executing "Program Setup". The
default PIN is "1234". To change the PIN setting, refer to
Password/Parental lock settings on page 28. To clear
the PIN setting (PIN input will no longer be needed), refer to
CLEARING THE PIN on page 40.
E
Additional Search
Use this menu to add new services automatically after
auto installation has been completed.
E
Manual Search
Add new services within a specified frequency band.
• Enter the frequency using 0–9 numeric buttons.
• You can perform "Manual Search" with a service number
only when the five Nordic countries have been selected in
the country setting.
26
E
Manual Adjust
Configure various settings for each service using the
Colour (R, G, B) buttons.
Service Service
No. Name
DTV 993 SIT 3
DTV 994 SIT 2
DTV 995 SIT 1
DTV 999 HD Monosco
: Lock : CH Skip
R G
1
Press a/b to select the desired service.
2
Press the colour button on the remote control unit
corresponding with the item you want to reconfigure.
The ✔ mark indicates the operation is set to on. Each
•
time the colour button is pressed, you can switch the
corresponding operation on/off.
Buttons for Manual Adjust operation
Lock: Press R button.
When the service is locked, you must enter your PIN
whenever you tune to the service.
CH Skip: Press G button.
Services with a ✔ mark are passed over when pressing
Pr/s on the TV or remote control unit.
Sort: Press B button.
The item position of services can be sorted.
1 Press a/b to select the service whose item
position you want to move, and then press OK.
DTV 994 SIT 2
DTV 995 SIT 1
2 Press a/b to move it to the desired position,
and then press OK.
DTV 994 SIT 1
DTV 995 SIT 2
3
Repeat steps 1 and 2 until all desired service
items are sorted.
CH Old
Lock
Skip LCN
✔
✔
: Sort
B
✔
✔
✔
✔