Menu Operation; What Is The Menu; Common Operations - Sharp Aquos LC-32DH77E Operation Manual

Menu operation

What is the MENU?

• You need to call up the OSD to perform settings for the TV. The OSD for the settings is called "MENU".
• The "MENU" enables various settings and adjustments.
• The "MENU" can be operated with the remote control unit.

Common operations

1
Display the MENU
Screen
Press MENU and the "MENU"
screen displays.
Picture
DYNAMIC
OPC
Backlight [+14]
Contrast [+30]
Brightness [0]
Colour [0]
Tint [0]
Sharpness [0]
Advanced
Reset
3
Exit the MENU
screen
The operation will exit the "MENU"
screen if you press END before it is
completed.
NOTE
• "MENU" options differ in the selected input modes, but the operating procedures are the same.
• The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly from the actual screens.
Items with 4 cannot be selected for various reasons.
•
Operation without a remote control unit
This function is useful when there is no remote control
unit within your reach.
1
Press MENU and the "MENU"
screen displays.
2
Press Pr/s instead of a/b
or ik/l instead of c/d to
select the item.
3
Press b to complete the setting.
NOTE
• The "MENU" screen will disappear if left unattended for several
seconds.
22
[Off]
–16 +16
0 +40
–30 +30
–30 +30
–30 +30
+10
–10
2
Select an item
Press a/b/c/d to select/adjust the
desired menu, and adjust the item to
the desired level, and then press OK.
Press 6 to return to the previous
"MENU" page.
E
Selecting in the MENU
ECO
Energy Save
No Signal Off
No Operation Off
Sleep Timer
E
Selecting options
Digital Search
About the Guide Display
The Guide Display at the bottom of the screen shows
operations with the OSD.
: Select : Enter
OK
The bar above is an operational guide for the remote
control unit. The bar will change in accordance with
each menu setting screen.
[Off]
[Disable]
[Disable]
Analogue Search
: Back : End
6
MENU