Watching Tv; Daily Operation; Switching On/Off; Switching Between Analogue And Digital Broadcasts - Sharp Aquos LC-32DH77E Operation Manual

Watching TV

Daily operation

Switching on/off

Turning on/off the power
Press a on the TV.
Switch it off by pressing a on the TV.
Standby mode
E
To standby mode
If the TV is switched on, you can switch it to standby
by pressing B on the remote control unit.
E
Switching on from standby
From standby, press B on the remote control unit.
TV indicator status
B indicator
Off Power off
Green Power on
Red Standby
NOTE
• If you are not going to use this TV for a long period of time, be sure
to remove the AC cord from the AC outlet.
A small amount of electric power is still consumed even when a is
•
turned off.
Switching between analogue and
digital broadcasts
E
Watching digital
broadcasts

Changing channels

With Pr/s:
10
NOTE
• When turning off the power using
a on the TV, EPG data will be lost,
and programmed timer recordings
will not be performed by the TV.
* The terminal layout may differ
depending on the model.
Status
E
Watching analogue
broadcasts
With 0–9:

Selecting an external video source

Once the connection is made, press
b to display the "INPUT SOURCE"
screen, and then press a/b to
switch over to the appropriate
external source with OK.

Selecting a sound mode

E
DTV mode:
If multi sound modes are received, each time you
press 2 the mode switches as follows.
Audio (ENG) : STEREO
L/R
Audio (ENG) : CH A
CH A
Audio (ENG) : MONO
Press c/d to select L or R sound when the STEREO
or DUAL MONO screen is displayed.
Audio (ENG) : STEREO
L/R L
NOTE
• The sound mode screen disappears in six seconds.
• Selectable items vary depending on the received broadcasts.
E
ATV mode:
Each time you press 2, the mode switches as
shown in the following tables.
NICAM TV broadcasts selection
Signal Selectable items
Stereo NICAM STEREO, MONO
Bilingual NICAM CH A, NICAM CH B, NICAM CH AB, MONO
Monaural NICAM MONO, MONO
A2 TV broadcasts selection
Signal Selectable items
Stereo STEREO, MONO
Bilingual CH A, CH B, CH AB
Monaural MONO
NOTE
• When no signal is input, the sound mode will display "MONO".
INPUT SOURCE
TV
EXT1
EXT2
EXT3
EXT4
HDMI1
L R LR
CH B CH AB
R LR